E-Z Patch® 4 (White) Pool Tile Grout Repair is our above water mixture (water must be lowered), does not rush you and matches the original sanded pool tile grout used by most swimming pool tilers. Contains modified materials with Pozzolans and Latex Polymers. After doing the repair, water may be refilled the next day. Liquid Latex Bonder included in kit. Available in 1 lb., 3 lb., 10 lb. & 50 lb. sizes.
Before mixing and applying the repair material, make sure it is the right color and material match! It is sometimes hard to see exactly what the color will be from computer monitor screens.
Take a small amount of dry material out of the repair kit and mix with water to be the consistency of “Putty”. Then, wet the existing surface that you are trying to match and compare the wet sample to the wet existing surface. If the material needs to be darker, add a very small amount of E-Z Patch Black Cement Dye and dry mix well. If the material needs to be lighter, add a very small amount of E-Z Patch Titanium Dioxide White Cement Colorant and dry mix well. Both colors are available on our website. You can also use any good cement dye. Repeat this process until the color match is satisfactory.
Additional information
Weight
N/A
Dimensions
N/A
Size
1lb, 3lbs, 10lbs, 50lbs
Coverage
1 lb. 3 sq. ft.
3 lb. 10 sq. ft.
10 lb. 33 sq. ft.
50 lb. 150 sq. ft.
Before mixing and applying the repair material, make sure it is the right color and material match! It is sometimes hard to see exactly what the color will be from computer monitor screens.
Take a small amount of dry material out of the repair kit and mix with water to be the consistency of “Putty”. Then, wet the existing surface that you are trying to match and compare the wet sample to the wet existing surface. If the material needs to be darker, add a very small amount of E-Z Patch Black Cement Dye and dry mix well. If the material needs to be lighter, add a very small amount of E-Z Patch Titanium Dioxide White Cement Colorant and dry mix well. Both colors are available on our website. You can also use any good cement dye. Repeat this process until the color match is satisfactory.
E-Z INSTRUCTIONS:
1. Lower pool water to 6” below the repair area.
2. Remove all loose material or grout.
3. Add LIQUID CEMENT BONDER to E-Z PATCH 4® DRY CEMENT MIX (for using just part of the kit you can use fractions EXAMPLE = 1/4 of the liquid cement bonder to 1/4 of the dry mix).Add water and mix (stir) until you get the consistency of “mashed potatoes”.
4. Completely fill area to be grouted and allow to partially dry (approx. 5 min.).
5. Using a damp sponge, lightly wipe off excess grout leaving joint full and flush. Rinse sponge often.
6. When grout is dry, polish residual “haze” off with a dry, clean cloth taking care to keep the cloth dry during this polishing period.
You may refill water the next day
View our instructional repair video showing how to do this repair at www.e-zpatch.com
E-Z ANSWERS to some Frequently Asked Questions
Liquid Bonder is inside the jar
Product will cure faster in hotter weather, slower in cooler weather
Product is best stored between 40 degrees F and 90 degrees F
WARNING: CONTAINS CEMENT, AN ALKALINE SUBSTANCE IRRITATING TO EYES AND SKIN. CONTAINS LATEX CEMENT BONDER. SHOULD PRODUCT CONTACT EYES, FLUSH THEM IMMEDIATELY AND REPEATEDLY WITH WATER AND CALL A PHYSICIAN. DO NOT TAKE INTERNALLY. IN CASE OF SKIN CONTACT, RINSE IMMEDIATELY WITH WATER. USE OF RUBBER GLOVES IS RECOMMENDED.
