E-Z Patch® 8 Anchoring Cement is a fast setting, expandable and strong cement used for anchoring grab rail anchors and bolts. This product contains special acrylic modified materials with pozzolans (siliceous volcanic ash) and polymers.
E-Z Patch® 8 Anchoring Cement can be cement textured or painted and is chosen by professionals and home owners alike for their interior and exterior projects. E-Z Patch #8 is Concrete Gray in color. Liquid acrylic bonder is not needed on this kit. Available in 1 lb., 3 lb., 10 lb. & 50 lb. sizes.
1. Clean oil, dust or loose debris from sides of hole to be filled and dampen surface slightly. Make
sure hole is large enough to allow cement to flow easily around metal object.
2. Add water to E-Z PATCH® 8 DRY CEMENT MIX and mix it into a slightly pour-able consistency
enough to be used within 5 minutes. Make sure the metal object is already in place and hold in
place until material begins to stiffen. (If you are using this product for anchoring on vertical
applications, you should mix it with less water so it is the consistency of “mashed potatoes”.)
Sets hard in about 15 minutes.
To make a Custom Color with any of our cement type repair supplies, use any cement dye.
View our instructional repair video showing how to do this repair at www.e-zpatch.com
E-Z ANSWERS to some Frequently Asked Questions
Liquid Bonder is not required for this repair kit.
Product will cure faster in hotter weather, slower in cooler weather
Product is best stored between 40 degrees F and 110 degrees F
WARNING: CONTAINS CEMENT, AN ALKALINE SUBSTANCE IRRITATING TO EYES AND SKIN. SHOULD PRODUCT CONTACT EYES, FLUSH THEM IMMEDIATELY AND REPEATEDLY WITH WATER AND CALL A PHYSICIAN. DO NOT TAKE INTERNALLY. IN CASE OF SKIN CONTACT, RINSE IMMEDIATELY WITH WATER. USE OF RUBBER GLOVES IS RECOMMENDED.
